How To Use The Semi-trailer Tractor

Semi-trailer is now a vehicle for transporting large cargoes, and the traction seat is a pulling member used for pulling semi-trailers by cargo traction vehicles. It is mainly composed of a seat cover, a saddle base, and a locking mechanism. It is pressed by the whole hydraulic press. It is an important component of our container semi-trailer. Its use must be different from that of operating a semi-trailer. What is its method of use?

1. When lubricating grease is used for the first time, ensure that the above lubricating parts are cleaned every 5000 kilometers, and reapply the grease by redrawing the picture. Before applying grease, make sure that the traction pin is free of impurities and burrs. We recommend that you use quality heavy-duty grease when you use it normally. After use, you can ensure that it has good wear resistance and Kangye performance. Extended service life.

2. In the process of use, the adjustment rod should be used according to a certain method of use, and the adjustment rod should be pulled out at will. Otherwise, the cause of wear and wear will make the locking of the entire mechanism more and more tight, resulting in more serious friction.

3. When attaching the trailer, it should be noted that the adjustment from the traction seat is the standard upper seat height. The distance between the traction pin and the plane of the traction seat is too high or too low will affect the trailer. Impression of our use, general The distance is that the lower plane of the trailer connection plate is 0 ~ 50mm lower than the upper plane of the traction seat.