Chengli Special Vehicles Debuts Isuzu-Powered 33m Straight Arm Bucket Truck - Blue License Plate Optimized

 

Aerial work platforms (AWPs), also known as elevating work platforms (EWPs), cherry pickers, or boom lifts, are specialized vehicles designed to provide safe and efficient access to elevated work areas. These vehicles are equipped with extendable booms, platforms, or baskets that can be raised to various heights, allowing workers to perform tasks at heights that would otherwise be difficult or dangerous to reach.

 

 

 

 

 

 

1. Blue Plate & C-License Compatibility: Easy to drive with a C license, good passability, suitable for operations in narrow spaces.
2. Working Height: Up to 28 meters (customizable up to 33 meters).
3. Large Working Platform: Carries 200KG (up to 3 people), rotates 360°.
4. High-Strength Steel Structure: Lightweight, high strength, high toughness, and high reliability.
5. Electro-Hydraulic Proportional Valves: Combined with an advanced CAN bus control system and wireless remote control for safer and more convenient operation.
6. 5-Inch LCD Display: Real-time display of boom length, elevation angle, platform height, working height, etc.
7. Advanced Boom Structure: 7-section steel wire rope telescoping structure for safer and more stable operation.
8. Front & Rear V-Shaped Outriggers: Wider lateral span for enhanced safety and stability, optional "soft leg" protection.
9. High-Quality Hydraulic & Electrical Components: Load-sensing proportional valves, balance valves, CAN bus control systems from renowned manufacturers.
10. Euro VI Chassis: Equipped with air conditioning and hydraulic power steering.
11. High-Strength Stainless Steel Basket: Durable, lightweight design for greater load capacity.
12. 18-Sided Working Boom: Synchronous telescoping, compact structure, high efficiency, wide working range. External telescoping cylinder and steel wire rope mechanism for easy fault observation and maintenance.
13. CAN Bus Control System: Neat and simple wiring. Two operation options: computer operation and wireless remote control (optional basket operation).

 

 

 

 

 

 

1. Upgraded Design & Boom: Utilizes high-strength 960 material for a flawless, durable appearance and robust boom.
2. Height Control: All 28-meter aerial work platforms maintain a height under 2.9 meters, ideal for elevated and height-restricted environments.
3. Tailless Design: Ensures adequate safety distance for adjacent lanes during side operations in narrow alleys.
4. 220V Power Interface Option: Working platform can be equipped with a 220V mains power interface, enabling the use of regular electric tools regardless of on-site power conditions.
5. "Soft Leg" Protection (Optional): When outriggers are not firmly supported, boom elevation is restricted in hazardous directions.
6. Wireless Remote Control: Allows for convenient operation from a distance.
7. Computer-Controlled Safety: Features automatic amplitude limiting, hazard alarm, and exceptional safety performance. A display on the lower part of the vehicle shows real-time operational status.
8. 18-Sided Working Boom: Synchronous telescoping, compact structure, high efficiency, and wide working range. Telescoping cylinders can be internally or externally mounted, with steel wire rope (or chain) telescoping mechanisms for easy fault observation and maintenance.
9. CAN Bus Control System: Neat and simple wiring. Three operation modes: platform operation, wired/wireless ground operation for better observation of the workspace, ensuring safety, reliability, and high efficiency.
10. After-Sales Guarantee: Unconditional after-sales service for any faults not caused by customer misuse, ensuring zero cost to the customer for repairs.

 

 

 

 

 

 

 

 

 

1. Pump Drive Prohibited While Driving: Do not drive the hydraulic pump while the vehicle is in motion (disable the PTO while driving).
2. Pre-Operation Inspection: Carefully inspect and confirm that the aerial work platform is free of faults before starting work.
3. Parking on Flat, Firm Ground: Park the vehicle on a flat and firm surface before starting work. Do not operate the vehicle on slopes greater than 5 degrees.
4. Outrigger Use Prohibited Without Deployment: Do not operate without deploying outriggers. Do not adjust outriggers while working with personnel in the basket.
5. Wind Speed Limitation: Stop work when wind speed exceeds Force 5.
6. Safety Gear Required: Personnel working at heights must wear safety harnesses and helmets.
7. Engine Idling & Operator Presence: The engine should idle during aerial work. Operators must not leave the control panel.
8. High-Voltage Live Work Prohibited: Do not perform live work on high-voltage lines.
9. No Standing Under Boom: Do not stand under the telescoping boom while the aerial work platform is in operation. Do not operate the lower multiplexer valve while the boom is moving.
10. Obstacle Avoidance: Pay attention to and avoid surrounding obstacles during operation.
11. No Vehicle Movement After Boom Operation: Do not move the vehicle after the boom has been operated.
12. Boom Wire Rope Screw Inspection: Regularly check if the boom wire rope screw connections are loose. Tighten if necessary.
13. Slewing Bearing Nut Inspection: Regularly check if the nuts at the slewing bearing connections are loose. Tighten if necessary.
14. U-Bolt Inspection: Regularly check if the U-bolts are loose. Tighten if necessary.
15. No Over-Amplitude Operation: Do not operate the vehicle beyond its safe working limits.