Maintenance Method Of Gearbox Of Road Sweeper

The working form of the road sweeper is that during the driving process, the four sweeping plates of the body will fall down and rotate on the ground, and the suction cup will fall to absorb garbage and dust. Check these frequently used parts. For example, park the road sweeper in place and open the sweep brush and nozzle to observe the rotation of the sweep disc and the water outflow of the nozzle. If the water is not uniform, the nozzle needs to be cleaned. If the rotation of the sweep plate is not smooth, the pulley and hydraulic system on the sweep plate need to be checked. The pulley needs to be oiled frequently to ensure stability during operation. The brush needs to be replaced frequently, and some users are unwilling to replace the brush if they think it can be used. This idea is wrong. If the brush is broken or deformed, it needs to be replaced in time, otherwise it will affect other brushes. There are about 22 brushes on a scan plate. If a brush is not replaced in time due to deformation of a brush, the damaged brush will affect the normal use of the brush on the entire tray. The suction cup also needs to be cleaned frequently. The main maintenance of the suction cup is to clean the sludge and dust on the pulley, pay more attention to the lubrication on the pulley. There is also a suction tube in the suction cup that needs to be cleaned of mud and dust frequently. Otherwise, too much silt will affect the suction.